Passer au contenu
Antronix SD1P1000B Satellite/CATV Diplex Filter, 5–860 MHz CATV / 950–2150 MHz Satellite, DC Power Pass, 75 Ohm, ECT F-Ports

Antronix SD1P1000B Satellite/CATV Diplex Filter, 5–860 MHz CATV / 950–2150 MHz Satellite, DC Power Pass, 75 Ohm, ECT F-Ports

par Antronix
$199.99
  • Satellite and CATV on One Cable: Combines or separates 5–860 MHz cable TV signals and 950–2150 MHz satellite signals, allowing both services to share a single coaxial cable.
  • DC Power Pass for Satellite LNB: Supports power passing rated at 50 VDC and 1.65 amps to deliver power to the satellite LNB through the satellite signal path.
  • Low Signal Loss and Band Isolation: Maximum insertion loss is 2.0 dB on both signal paths. Isolation is at least 35 dB at 15–860 MHz and 950–2150 MHz, and 30 dB at 5–15 MHz.
  • Reliable ECT Connections: SCTE-compliant Eclipse Contact Technology F-ports provide increased contact surface area for lower contact resistance and dependable connections in 75-ohm coaxial systems.
  • Durable Housing and Surge Protection: A tin-plated die-cast zinc-alloy housing, fully soldered backplate, and 15 psi pressure seal provide corrosion resistance, RFI shielding, and protection against water ingress. All ports withstand multiple 6 kV ring-wave surges per IEEE C62.41 Category A3.

Antronix SD1P1000B satellite/CATV diplex filter combines satellite and cable TV signals onto one coaxial cable or separates them into individual signal paths. The CATV port passes 5–860 MHz signals, while the SAT port passes 950–2150 MHz satellite signals. This allows installers to use existing coaxial wiring for both services without running a separate feed. DC power passing rated at 50 VDC and 1.65 amps supports power delivery to the satellite LNB.

Designed for 75-ohm systems, the diplexer provides a maximum insertion loss of 2.0 dB on each path and isolation between the satellite and CATV bands. SCTE-compliant ECT F-ports, a corrosion-resistant tin-plated zinc-alloy housing, and a fully soldered backplate support dependable connections and RFI shielding. Integrated mounting tabs and a heavy-duty ground block simplify installation. The unit operates from −40°C to +60°C and features 6 kV ring-wave surge withstand capability and corrosion resistance tested to ANSI/SCTE-143 for 1,000 hours of salt-spray exposure.