Skip to content
Antronix DPA42-54 1 GHz Sub-Split Diplex Filter, 5–42 MHz Upstream / 54–1002 MHz Downstream, 75 Ohm, ECT F-Ports

Antronix DPA42-54 1 GHz Sub-Split Diplex Filter, 5–42 MHz Upstream / 54–1002 MHz Downstream, 75 Ohm, ECT F-Ports

by Antronix
$199.99
  • Sub-Split Frequency Separation: Routes 5–42 MHz upstream signals through the LOW port and 54–1002 MHz downstream signals through the HIGH port for cable broadband applications.
  • Low Signal Loss and High Isolation: Maximum insertion loss of 1.5 dB on the LOW path and 1.2 dB on the HIGH path helps preserve signal levels, while at least 45 dB of isolation limits interference between bands.
  • Reliable ECT Connections: SCTE-compliant Eclipse Contact Technology F-ports provide increased contact surface area for lower contact resistance and dependable connections in 75-ohm coaxial systems.
  • Durable, Sealed Housing: Die-cast zinc-alloy construction, corrosion-resistant tin plating, and a fully soldered backplate provide RFI shielding. A 15 psi pressure seal helps prevent water ingress.
  • Surge Protection and Easy Mounting: All ports withstand multiple 6 kV ring-wave surges per IEEE C62.41 Category A3. Integrated mounting tabs and a heavy-duty ground block simplify installation, with operation from −40°C to +60°C.

Antronix DPA42-54 is a 75-ohm sub-split diplex filter designed to separate upstream and downstream frequency bands in cable broadband systems. Its LOW port passes 5–42 MHz upstream signals, while its HIGH port passes 54–1002 MHz downstream signals. Low insertion loss helps maintain signal strength, and a minimum of 45 dB of isolation between the bands supports reliable two-way communication.

Built for dependable service, the DPA42-54 features SCTE-compliant ECT F-ports, a tin-plated zinc-alloy housing, and a fully soldered backplate for RFI shielding. A 15 psi pressure seal helps resist water ingress, while integrated mounting tabs and a heavy-duty ground block support straightforward installation. The filter also provides 6 kV ring-wave surge withstand capability and corrosion resistance tested to ANSI/SCTE-143 for 1,000 hours of salt-spray exposure.