SatelliteSale Pipe Adapters for Starlink Circular and Rectangular Gen 1 and Gen 2 Antenna Mounting for SatelliteSale Antenna Mast 2" O.D

This adapter allows you to install Starlink onto SatelliteSale Antenna Mast and J-Pipe. It is designed to attach to SatelliteSale Antenna Mast 2" O.D (ASIN: B09BP1D71F) and accommodates Starlink pole. Our adapter is produced using the latest, advanced 3D printing technologies. The plastic that we use is durable and withstands corrosion. It has recesses for Starlink's insertion buttons to provide a snug fit. In addition, it has an orifice at the bottom so you can pass the cable right through the adapter.

• Please make sure to carefully read the information located below on our product page to choose the right matching product for your needs.

Installing Starlink with a SatelliteSale Starlink Pipe Adapter and SatelliteSale Antenna Mast involves the following steps:

Installing Starlink with a SatelliteSale Starlink Pipe Adapter and SatelliteSale Antenna Mast involves the following steps:

1. Find a suitable location for the Starlink Dish - it must have a clear view of the sky with no obstructions.
2. Use the included mounting bracket to attach the dish to a solid surface such as a roof or wall.
3. Mount the adapter into the antenna mast.
4. Run the power cord and Internet cable to the Starlink dish, ensuring they are connected securely.
5. Plug the power cord and Internet cable into your outlet.
6. Turn on the Starlink and wait for the automatic angle adjustment to complete.
7. Once the automatic angle adjustment is complete, the Starlink is ready to use

• It is important to note that the installation process may vary depending on the specific components and equipment you are using, and it is always best to use SatelliteSale equipment for the most accurate installation procedure.

SatelliteSale Adapter for Starlink Circular Gen 1

• Ensure the adapter is securely fastened.
• Insert the Starlink mount pole into the antenna mast pre-installed with SatelliteSale Starlink Pipe Adapter.
• The Starlink Gen1 Pipe Adapter has two round openings for the special push-buttons located on the Starlink Mount Pole Gen 1. This way, you can insert the Starlink Mount Pole Gen 1 into the Adapter by pressing down both buttons while making sure they are properly aligned with round openings in the adapter.

SatelliteSale Adapter for Starlink Circular Gen 2

• Ensure the adapter is securely fastened. We include matching screws for easy installation.
• Insert the Starlink mount pole into the antenna mast pre-installed with SatelliteSale Starlink Pipe Adapter. Tighten the screws to ensure the pole is firmly secured.
• The Starlink Gen1 Pipe Adapter has one square notch just as wide as a push-down square button located on the Starlink Mount Pole Gen 2. This way, you can insert the Starlink Mount Pole Gen 2 into the Adapter by pressing down the square button.

	SatelliteSale Adapter for Starlink Circular Gen 1	SatelliteSale Adapter for Starlink Circular Gen 2	SatelliteSale Universal J Pipe Antenna Mast
Starlink Compatible:	Gen 1	Gen 2	Gen 1/Gen 2 with Adapter
Material:	Polylactic Plastic	Polylactic Plastic	Powder Coated Steel
Color:	Gray	Gray	Gray
Screws:	Not Included	Included	Included + Rubber Pitch Pads
Corrosion Resistant:	✓	✓	✓
Recommended Use:	Indoor, Outdoor, Universal	Indoor, Outdoor, Universal	Indoor, Outdoor, Universal
Manufacturer:	SatelliteSale	SatelliteSale	SatelliteSale